vharrison
Island Girl
It looks like a fantastic idea.
If I had the skills, I wanted to Try one from nylon. Shape it like a bullet and call it the rope or crotch bullet. I feel it might work. Keep it small. But be able to sleeve the tip on up to 1/2 rope in the end. Probably 3/8 -1/2" deep. About an 1-1/2 " long.I had an idea for a device that could possibly get through a tight junction, but so far my prototypes just keep getting stuck.
Didn't someone take one of the water hammer arrestor, 1/2" copper tubes, removed the base, and drilled a small hole in the domed top, smoothed all edges to create a product like that?
I think that is what Javier in San Diego and others use to get lines through palm fronds.
View attachment 123481
Maybe a suitable plastic cigar tube would work. It would be cheap and accessible enough to try.If I had the skills, I wanted to Try one from nylon. Shape it like a bullet and call it the rope or crotch bullet. I feel it might work. Keep it small. But be able to sleeve the tip on up to 1/2 rope in the end. Probably 3/8 -1/2" deep. About an 1-1/2 " long.
https://www.amazon.com/Doob-Tube-Vials-Pack-Smell-Proof/dp/B07MVRYC5T/ref=sr_1_6?keywords=plastic+cigar+tube&qid=1663426168&sr=8-6
Throw line threads through a hole in the tip of the bullet. Runs through middle of bullet to rope behind bullet. Climb rope nestled into the hollowed out rear of bullet just deep enough to hide both throw line and rope end.The bullet tip thing would work only if there's enougth room to allow the rope and the thing to pass just over the thowline's way, like a "sharp" edge on a open crotch, some ridges on a rougth bark or small diameter limbs but open crotch. In a pinched fork with included bark, as the black loccust loves to do, no way the rope can pass through, with bullet tip or not. It's like wanting to get your rope in a key hole or under a door. The throwline should rize up several inches up to come in a wide enougth gap. No way you can do it by pulling it from the ground. At the bottom, the gap can be soo tight that even the throwline itself can be stuck just by wedging inbetween the two barks.
Throw line threads through a hole in the tip of the bullet……
I am out of crayons.
Yes, that's exactly how I figure it would be done... and acts like I said.Throw line threads through a hole in the tip of the bullet. Runs through middle of bullet to rope behind bullet. Climb rope nestled into the hollowed out rear of bullet just deep enough to hide both throw line and rope end.
I am out of crayons.