What are the odds?

  • Thread starter Thread starter Knotahippie
  • Start date Start date
  • Replies Replies 17
  • Views Views 2K
K

Knotahippie

Guest
Was talking to a friend of mine yesterday about a job he was doing.

He Says "Get the camera and come check this out"

Not expecting much, I went up there.

Nail in the hinge! :O
 

Attachments

  • 100_0565.JPG
    100_0565.JPG
    178.2 KB · Views: 5
  • 100_0555.JPG
    100_0555.JPG
    201 KB · Views: 6
  • 100_0552.JPG
    100_0552.JPG
    199.8 KB · Views: 5
WOW!! I doubt you will ever see that again!
Most times I have barbed wire all the way through my back cut:lol:

VERY neat pic, thanks for taking it and sharing it BTW!
 
Wow! Couldn't have worked out better if you wanted it to. Can't say I've been so lucky with nails.

Once I cut a 16 penny perfectly in half for its full length. I should have taken a pic of that one.
 
in indiana i found an old metal hitching post grown into a removal i did for s and s
horses head and ring on top of it,
hit that sob in the face cut, and couldnt tip it over even with a crane, had to get a loader from the quarry to push it over, screwed up a lot of chains
found soft metal shot from civil war era home in princeton indiana
and like andy lots of barbed wire, and fence posts in back cuts
thank god for high stumping
 
My personal best was a full sized railroad spike in the stump cut. Last cut of the day. Took me an hour and a half to get that stump flushed off. :cry:
 
I got six nails on the two cuts of my undercut once. With a brand new chain on the 32" bar. Somewhere out by my shop that pie is still kicking around, I brought it home with me.
 
Umm, let's see; things I've cut - Nails, railroad spikes, rebar, bullets, chain link fence, barb wire, galvanized pipe, electrical conduit, concrete, stones, golf balls, and a horseshoe, just to name a few. :|:
 
  • Thread Starter Thread Starter
  • #11
My buddy said he could feel something in the cut, just thought it was a knot or something.

I havent run into anything...Yet(knock on wood!).
 
Wrecked a new 020 chain 60' up a London Plane once, confused the hell outta me then I worked out it was shrapnel from WW2
 
Lots of lead from shotguns, and plenty nails when milling. Crazy steel markers of some sort in a particular orchard near Stockton, every tree had a bunch. That's where I perfected my sharpening technique. :|:

One through the hinge, that's a keeper.
 
Usually barbed wire for me.. Only once in the hinge though...
A ceramic insulator once at about 20 foot up... Trashed a 36 skip on the 066.. We have a lot of old telegraph wire up here too.
 
Back
Top