i think i might have tried to Dutch kerf to fence side on face_1(also later faces_2,3), and opened this face some this/camera side as receiver of that push w/o resistance
>>thin backcut on fence side, open on this , camera side with thicker hinge>>tapered hinge into Dutch face push, that fat taper, fence side closes and open side beckons tree this way/towards camera
>>probably still hit fence but hopefully less
>>i always try to save fence (or shed etc.) even if being removed just trying to see how good am
>>or if removing fence anyway consider knocking out before >> jest so i didn't hit it
Maybe even cost cx less if fence is removed beforehand>> but if it is there, see how good i am
.
Next 2 faces have pressure up, not down>>orchestrate tension/compression/reliefs for this reverse pro-cedure than normal downward pressure of face_1 (like face is wheel chuck removed to allow roll forward)
>>would be cutting into bind if faced down as normal face_1>> face to relieve stresses, and back cut to allow fold to that now open path, just like fell or drop, only follow different direction of forces as guide/not eye
So he faced to fold up with that existing pressure, and backcuts from below to release into those faces upward
>>i think of it as reverse felling, exercise my logic to see the forces as simply reverse fell / UP; like crane lift rotation on hinge upward
i woulda tried to then Dutch the fence side TOPS, backcut low to leave thin fence side too and open faces more as receivers of that push as thicker hinge this is side is pulling too into hinge faces to side
>>trying to get a bit of turn as fold out of each, inching top away from fence>> 1st 3 faces Tapered and Dutch to serve towards camera
4th cut /no face thru VERY confident no binding pressure as cuts straight thru with good saw 1 stroke thru thick, dry>> he really studied, weighed and measured this or would have changed topic to saw release.
>>and stump end remains standing so very stable on blind side of fence
THUS>> even with binding push back pressure on ends towards stump, weight is balanced or pulling away strong on single kickstand would think, or would bind back into 4th/no face cut thru
.
Released all by working first cut , that drops instead of folds; but triggering fold from cutting upward on 3rd might have given more fold(?)/ but riskier position
>>cutting down into this cut, as to impact release of dominoes, rather than fold up on other positions after all that work??
>>Actually i think should have also worked that 1 kickstand into ground, with upward fold/Dutch/thick hinge to roll towards camera in the spice mix.
>>>>would have given more pivotal force roll this way, but not the reach on that arm that 3rd face gives, but more initial power
>>end with rope over top, around to hitch bottom leg side and pull with truck to get roll and overloading fail of hinges slowly to get more fold towards camera>> w/o man in batter's box
If i still hit fence, i tried/witnesses, i learned something, exercised skills in tough one('harvested opportunity') that doesn't come along often and tried to do it time equitably, cuz this is a business, and clock is running.
.
That is without assessing if could safely stand up there and ease limbs over fence down, or weaken, but only with feather light forces of any motion to orchestrate. Anything safe to shave points, fence may be only pawn, but don't like losing it in this chess game.
As stated man moved cleanly and swiftly thru tuff puzzle fine w/o much bad; i just would have tried to harvest as quick training of self more; to hopefully more sharper(but that's just me/and we really don't see rest of tree to 2nd guess bindings).
(i find that the "eagle's claw", is only as sharp as whatever has to draw it against, and the angle of that draw; and would try to pay price/cash in on this rare lesson)
i do kinda like a long single kickstand vertical on some of these(NOT seen here). Face towards fence higher on kickstand, back cut camera side and rope pull with truck just above cut
>>reaching for that leg to fold slow towards truck pull as release/now overloaded mechanical fuse, to get farther off of fence with pivot/reach
>>NOT seen here, but i look for that shituation, or whittle several existing legs to that one support stilt to then fold etc.
>>slower folds, w/o man in batters box, as saw not needed to trigger dominoes walked to near failure so can fold into open faces, Dutches pushing, tapereds pulling