Nutball
TreeHouser
CLOSED TO ENTRIES! Ported Echo 2511t Raffle! Drawing 5/13
This Echo 2511t cuts 20-25% faster than stock. It has had a slight compression increase, exhaust and intake port timing adjusted, muffler mod, voided warranty, spark screen removed, lighter piston, modified carb, and the optional spike bumper. It comes with the air filter attachment greased to prevent sawdust from leaking around the filter. It has had 2 tanks of gas through it for testing, and has had the cylinder inspected to ensure no issues from the porting process. The oiler on these is plenty strong and could probably oil an 18", so it shouldn't have any problems burying the bar in dusty hardwoods unlike the ms150, just know it can run out of oil quickly if turned up over half way.
It comes with the winner's choice of:
-New 12" 3/8 .050 stock Echo bar and Oregon chain (jumpy when new and cutting big wood)
-An Oregon .043 3/8 12" b/c that has a half tank of testing on it (fastest cutting option, but not the smoothest)
-A 1/4" sprocket, & NO B/C (.050 is about like the above options but slower, .043 is very smooth and easily lets you bury a 14" bar in hard wood.)
$20 per entry, multiple entries allowed. Use the yellow Donate link at the very top of the page to submit your entries, be sure to include who you are, so we know who to put in the drawing. Any amount above $400 supports the Tree House.
Here's a video of this particular one, though not at it's fastest tune yet in the cutting clips. The first clip was from today revving around 14,500rpm & is at its fastest working tune.
<iframe width="560" height="315" src="https://www.youtube.com/embed/4gDezk2y2UI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
ENTRIES CLOSE 5/11, Drawing 5/13
Note about the spark arrestor: If required for your location, small self tapping sheet metal screws could probably be used to secure a screen over the extra hole in combination with the stock screen.

This Echo 2511t cuts 20-25% faster than stock. It has had a slight compression increase, exhaust and intake port timing adjusted, muffler mod, voided warranty, spark screen removed, lighter piston, modified carb, and the optional spike bumper. It comes with the air filter attachment greased to prevent sawdust from leaking around the filter. It has had 2 tanks of gas through it for testing, and has had the cylinder inspected to ensure no issues from the porting process. The oiler on these is plenty strong and could probably oil an 18", so it shouldn't have any problems burying the bar in dusty hardwoods unlike the ms150, just know it can run out of oil quickly if turned up over half way.

It comes with the winner's choice of:
-New 12" 3/8 .050 stock Echo bar and Oregon chain (jumpy when new and cutting big wood)
-An Oregon .043 3/8 12" b/c that has a half tank of testing on it (fastest cutting option, but not the smoothest)
-A 1/4" sprocket, & NO B/C (.050 is about like the above options but slower, .043 is very smooth and easily lets you bury a 14" bar in hard wood.)


$20 per entry, multiple entries allowed. Use the yellow Donate link at the very top of the page to submit your entries, be sure to include who you are, so we know who to put in the drawing. Any amount above $400 supports the Tree House.

Here's a video of this particular one, though not at it's fastest tune yet in the cutting clips. The first clip was from today revving around 14,500rpm & is at its fastest working tune.
<iframe width="560" height="315" src="https://www.youtube.com/embed/4gDezk2y2UI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
ENTRIES CLOSE 5/11, Drawing 5/13
Note about the spark arrestor: If required for your location, small self tapping sheet metal screws could probably be used to secure a screen over the extra hole in combination with the stock screen.