OK go ahead and laugh at my Poulan

  • Thread starter Thread starter Cut4fun
  • Start date Start date
  • Replies Replies 499
  • Views Views 82K
Isn't it weird that most small to midsize saws didn't have bucking dogs back then? I remember the first time I saw a Stihl 020T and was surprised by the steel dogs. These days you just expect the dogs to be there on every saw.
 
  • Thread Starter Thread Starter
  • #27
This saw is a Jonsered design. The saws are really great IMO.
I have a Partner 710, same family of saws and it is a beast to go...
Wonderful saw!

Guy in TX sent me pics of the Partner 395 exact same saw in yellow. Well almost, I just noticed his P 395 has a chain brake on the clutch cover.
 
I see by that bottom pic it has a spring suspension system .Similar to the Craftsman/Poulan I have .

The thing actually does pretty well considereing what it is .Not really a bad little firewooder if the stuff isn't too large .

It has some problems though that I've not taken the time to decipher .For one though it had an air scoop gizmo like a Huskey that I thought it didn't need but evidently it does .Heats up a tad bit .
 
Guy in TX sent me pics of the Partner 395 exact same saw in yellow. Well almost, I just noticed his P 395 has a chain brake on the clutch cover.
To clarify my last post I meant the 415 Poulan is same family as the 710 I have.m I like these very much!

The Poulan 395 is same family as Partner 345/395.. These I don't like very much at all....
 
  • Thread Starter Thread Starter
  • #30
The Poulan 395 is same family as Partner 345/395.. These I don't like very much at all....

I need to clarify for you now too. Partner 395 is same as Poulan 2100.

I never heard or seen of a poulan 395 yet, but then again I never heard of a 2100 till this week.

Partner 395 drive side [World-class Micro] 12-24-10sm.JPG Partner 395 fan side [World-class Micro] 12-24-10sm.JPG
 
Last edited:
  • Thread Starter Thread Starter
  • #31
Another Poulan project with a long ways to go.

Poulan Pro 475. Same as the Jonsered 2077 8)

Thats my shade of yellow Al, Poulan, Partner sweeeeeeeeeeeet ;)


475pp.jpg 475pp3.jpg Copy of 475pp2.jpg
 
  • Thread Starter Thread Starter
  • #32
Any of you older guys run these 65cc poulans? Just picked up a poulan 4000 to check out for myself on some trading.
All I can tell so far is open port design from looking at cylinder pics posted in the past on the web.

poulan4000 005.jpg poulan4000 001.jpg poulan4000 003.jpg
 
I never seem to find any Poulans except the clam shell designs llke sold by Sears .There's the two s-25 but I'm not going to mess with them but they do have removable cylinders .
 
I think I had one many years ago that looked something like that. I want to say a 3700? Maybe 4400? But then I bought my first Stihl, an 038 Mag, and never used the Poulan again. I don't remember what happened to it but it was gone within 30 days of me buying the Stihl.
 
  • Thread Starter Thread Starter
  • #37
I like the stock 65cc Poulan 4000 :D

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/oydyJh35_Tw" frameborder="0" allowfullscreen></iframe>
 
  • Thread Starter Thread Starter
  • #38
Took in a couple more of them poulans :D Poulan 505 82cc and 365 65cc and a odd ball John Deere 800V 80cc, which turns out to be a Echo 8000 in yellow. Goooo Echoooo ;)

If these 2 80cc saws pan out, I might cut my woods ported 066 loose. I have posted pics of it here before if someone is interested.

CopyofJD800PP505365010.jpg

CopyofJD800PP505365011.jpg

CopyofJD800PP505365008.jpg

CopyofJD800PP505365009.jpg

JD800PP505365012.jpg

JD800PP505365013.jpg


Ones I need to go through and check over before putting up on the shelves. ;)

JD800PP505365014.jpg
 
  • Thread Starter Thread Starter
  • #40
Seems like the Pro's like Echo's too from what I have read. You also notice I didnt ever ask you for advice Bill. :lol:

Plus I am a nobody that just messes with saws for a stress relief. :lol::lol:

Copy of echo261.jpg IMG_0197.jpg IMG_0194.jpg IMG_0195.jpg
 
  • Thread Starter Thread Starter
  • #44
Or are you still waiting for good weather :/:

Just thawing out here and getting good and muddy.

I know I am going to like it after the test run before putting it up for winter. I almost pulled it out of hibernation when a ice storm was coming in.
 
A heck of a deal you got on that Power Pruner, Kevin. I know several landscapers and tree guys who have them and they all like them a lot.
 
Speaking of power pruner ,I have a little that to do myself from looking at the trees this afternoon .Just like C4 Fun it's a tad soggy here at the moment .
 
Oh you can't imagine mud unless you've seen Ohio mud at certain times .The rich organic top soil will mire down just about anything if conditions are right .

Fact on my way home from work Monday I saw an old 3020 John-Deere sunk up to the axle .
 
  • Thread Starter Thread Starter
  • #50
I just called for 3-4 truck loads at 14 ton apiece of 57 limestone for my driveway. It's getting that bad with all this rain BS.
 
Back
Top