Al Smith
Mac Daddy
If you are doing any clutch work it's not a bad idea while it's apart to change the pilot bearing in the flywheel .If it's a bushing they don't usual go bad .Now the problem could be getting the old bearing out .If you have a little slide hammer some times you can hook it .Here's what you do .Find a piece of shafting,cut off bolt or whatever,even a hard wood dowel that just barely fits tight in the inside bore of the bearing .Fill the bore with grease and give it a mighty thump with a big hammer a BFH .The hydraulic pressure will blow it right out slick as a whistle .