Failed installing ring and ring saver

[Wwallace52590]

so i tried to install my ring and ring from the ground for the first time the other day, and ended up giving up and just using my rope sleeve instead. i got it up in the tree where i wanted it but when i went to pull my rope thru it kept getting stuck. I was trying to pull the sliced end thru, and it was getting stuck on the small ring.

Should i have been trying to pull the non spliced side of my rope thru the large ring? I had it girth hitched to my throw line with a series of half hitches right up to the spliced eye. Or maybe i had the saver adjusted to large? the rings were almost touching when up in the tree.

 

[Kaveman]

If it's not strictly necessary, don't worry about installing one. I keep a retrievable on my harness most of the time so I can reposition my TIP when I need to, but it's pretty rare that I try to drag extra crap up the throwline. All the time it takes to fiddle about with all the extra bullshit, I could be aloft.

 

[Wwallace52590]

If it's not strictly necessary, don't worry about installing one. I keep a retrievable on my harness most of the time so I can reposition my TIP when I need to, but it's pretty rare that I try to drag extra crap up the throwline. All the time it takes to fiddle about with all the extra bullshit, I could be aloft.

yea i guess ill stick to using my sleeve when setting it from the ground, super simple

 

[friedrich]

for climbing i would never do it. i do have a rigging cambium saver that i use a couple of times a year and never have a problem getting the rope to pass through but i do use it with s splice. it is fiddly but also satisfying

 

[Wwallace52590]

man if i didnt use a friction saver of some sort my ropes would get trashed quick fast and in a hurry. I got a 90ft hank of some kind of 12 strand line in a mystery box that ill use if i really dont wanna bother, but my main rope/ropes are 24 strand. we got some rough bark down here. my dan hausser sleeve is great tho, just slides over the rope i throw a slipknot in my rope and pull it out once its over my TIP, but after using my ring to ring ill say it definitely doesnt save as much friction

 

[SeanKroll]

yea i guess ill stick to using my sleeve when setting it from the ground, super simple

Sleeves are great.

Rope / cambium protection needs are minimal for SRT SRS. Hurray!




Leather sleeves will polish with use.

 

[Kaveman]

I've got a dan house saver too, hasn't been touched in a year. Like @SeanKroll says, SRT don't really chew up rope. Also, the local oak species are very rope friendly.