BR600 IPL

  • Thread starter Thread starter brendonv
  • Start date Start date
  • Replies Replies 25
  • Views Views 4K
I made a rule 20 years ago that equipment shall not be placed in front of, behind or under any vehicle or trailer on a jobsite. You're asking for trouble. If you must put stuff on the ground, place it next to an obstacle that will not be moved or driven over such as a mailbox or light pole. Putting stuff under the tree that the climber will be climbing next isn't a real brilliant move either.
 
  • Thread Starter Thread Starter
  • #5
Luckily I think I need just two clamps, a plastic collar thing, an elbow, and a throttle/handle assembly.

Probably be about half the cost of a new one. :|:

Oh, and figures I bought that new/used west coast ms460 I talked about a while ago. Great timing.
 
Call around and see if any dealers have any dead blowers you can raid for parts. Maybe check with any large landscape companies as well.
 
I have a parts BR 600 if you want it. Has a bad crank and no straps but all else is there.
 
There's a few parts on flea bay as well as one sitting rather low at the moment if you're interested .

Actually a couple of IPLs would be nice .It might be such a thing as the handles hoses etc from a BR 400-420 might work .A lot of wizards about saws but damned few on blowers I'd imagine .I'm certainly not one .
 
  • Thread Starter Thread Starter
  • #10
Husa, (name escapes me).

I'd be willing to pay for the parts, and shipping. They will fit in the 11$ flat rate box. Lemme know if your willing to rape a couple parts.
 
It's Bud Brendon. You are welcome to whatever you need, just shoot me your address and a list and it's in the mail.
 
I like to set saws down on the crane outriggers, it's a convenient easy reachable height and you never have to go looking. Lately the crane operator is saying that he doesn't so much approve. I don't know what is eating him.
 
Just checked in today... and saw this thread.
I also have two BR600s - one is running fine, the other was left in Michigan at my parents' place, was run without oil in the mix and so the lower end/piston/rings/jug are worthless.
Good carb/fan/straps/etcetera.
Let me know if you need anything that isn't available on Bud's.
 
Nice. Guess I should have asked around for a 200t handle before i spent $81 today :dur:
 
  • Thread Starter Thread Starter
  • #23
Gotta love it. Package sitting on the front porch. Everything I needed.

Thanks a bunch Bud.

Lemme know those dimensions so I can return the favor!
 
Glad to help. Looks like 60" tight eye to end of loop maybe a couple less for a biner, 3/8 would be great.
 
Back
Top