Borer “trap tree”

EAB came hard and fast here in my area. I not so so sure trap trees would have worked. It was like the entire county blew up at once, dead ash everywhere. Very few left.
 
  • Thread Starter Thread Starter
  • #5
yeah, from what I’d read, I don’t think EAB was stoppable. But maybe the gold spotted oak borers out here.

The green log thing is a good idea.


I’ve cut down healthy eucs, stored the logs in my yard, and found the cambium eaten out later when I went to make firewood. I guess I need to cover everything, bleh.
 
  • Thread Starter Thread Starter
  • #8
After a while you will hate cutting ash, dry, dusty, brittle wood that shatters like glass, jamming up the chipper at every feed cycle. I can still smell the dust.
Sounds normal 😆

I have a bunch of smallish dry stuff to cut up, I’m going to try my new $80 Chinese 36” light weight bar on my 461 with some Oregon multicut. Just so I can cut over there while I’m over here 😆
 
  • Thread Starter Thread Starter
  • #9
After a while you will hate cutting ash, dry, dusty, brittle wood that shatters like glass, jamming up the chipper at every feed cycle. I can still smell the dust.
Always wanted to give these sketchy chair prone ashes a whirl just to see. The two or three Arizona ashes I have cut were healthy, pretty hard/tough/strong.
 
I wouldn’t say barber chair prone so much as never turn your back to one. More like a shady Chihuahua with a shive in a prison exercise yard, give them respect and you’ll be fine, disrespect them and it’s sticky sticky. I’ve only had one barber chair on me, a few straight up pull over out of the ground during a test pull, a couple snap off at ground level, but most were solid.
 
Back
Top