cory's latest activity
-
cory replied to the thread Wood stove heat.A mix of hardwoods- red oak, red maple, norway maple, sugar maple, black locust, beech, hickory ( no fun to split lol), black birch. -
The class wasn’t that hard but I’ve had a lot of operating experience for other machines and I was the go to “rigger” for the crane op...
-
Science! Quartz, and all the other minerals it may contain are deposited in a liquid state, thus, there can only be a certain percentage...
-
The exhaust on my Golf is coming apart. It sounds like I'm in a fog horn when it upshifts.
-
As a general rule, if the quartz shows signs of oxidation, which that specimen does, it contains gold. As for how much? You'd have to...
-
cory reacted to SeanKroll's post in the thread The Humboldt is primarily for speed of production with
Smart.
12" is needed on 40' softwood logs, allowing the trim to be for cutting end checks and multiple bucks. 41' makes five 8'ers, so 6 bucks... -
cory reacted to Dave Shepard's post in the thread The Humboldt is primarily for speed of production with
Like.
These days, 6" of trim is typical. Some people used to try to get down to 3-4" with hardwood. Many of my timbers land on even feet. I... -
cory reacted to Burnham's post in the thread The Humboldt is primarily for speed of production with Like.
In logging here in the PNW, and I always assumed it was the same everywhere, the sawyers/buckers are required to buck to specific...
-
Maybe if I had a sauna the whole cold plunge thing might be very remotely probable.
-
cory replied to the thread Wood stove heat.I do that. I've tried both. Yup, did that but the heat output is alot lower compared to logs burning Thanks for the responses, all. I...
-
More air. Let the coals roll for a good forty minutes before adding logage.
-
I handle it like Rich does, though burning somewhat less dense fuels like we have here in my part of Oregon (Doug fir, BL maple, red...
-
Close damper to keep in more heat from coals or open to let them burn up?
-
cory replied to the thread The Official Work Pictures Thread.Was the crane op test difficult? In CT it is notoriously difficult. My crane guy says, as an analogy, 'we all know to stop at stop...
