flushcut
TreeHouser
Anybody uses their stuff? Their axes and crosscut saw look amazing. Same with the price! But fine tools come at a cost.
Tuatahi products?
- Thread starter flushcut
- Start date
- Replies 38
- Views 2K
Dave Shepard
Square peg, round world.
They've been the go to racing axes and saws for many decades.
Burnham
Woods walker
Link?...or are you gonna make this old sod look it up all by myself? 
stikine
Treehouser
Mesquite
Treehouser
Those axes look amazing! This is my first time seeing Tuatahi but I wouldn't hesitate to buy an axe from them, just going off of the pictures on their website. Those axes look deadly!!!
ruel
TreeHouser
At $500 I'd Be hesitating like crazy!
Mesquite
Treehouser
Australia and new Zealand are world renowned for there axemenship. Thats also new zeland money 500 of there dollars equals 344.68 of our dollars. If you look around a premium axe is going to cost you at least $250 so an axe that looks of that caliber easily. Plus you look for axes on esty or what ever it's called there are tons of axes for more than than .
www.etsy.com
Out of all of them I would rather have a Tuatahi
Axe - Etsy
Check out our axe selection for the very best in unique or custom, handmade pieces from our shops.
www.etsy.com
Out of all of them I would rather have a Tuatahi
SeanKroll
Treehouser
stikine
Treehouser
If you want to search around a bit you can still find a vintage crosscut saw. Try to get one that is crescent taper ground. Sharpening is an art and best left to the experts. The last one I had sharpened was around $10/ft.
stikine
Treehouser
Not sure what you mean about a "crosscut axe"...it's a saw not an axe
Marc-Antoine
TreeHouser
Perhaps the long teeth (like a garden saw) with just the very tip hardened can be bent, but the short ones will break. I tried that too to get a little more life on a slightly dull hardware store saw. Just "tac", maybe "criick" with special extra care but the tooth is already cracked and is ready to fall.
Mesquite
Treehouser
There are splitting and chopping or crosscut. Splitting cuts with the grain and with the crosscut or chopping the different profile is to cut against the grain. like how you would fell a tree with an ax or cut a log into rounds that would need splitting. to be able to do each task most efficiently different profiles are needed on different tools. bucking billy ray smith on youtube is a woodsman that love's his axes. he goes into detail hanging axe heads and he also take the camera when he does tree work. plus he is also fun to watch.
Last edited:
stikine
Treehouser
Yeah, you have to search far and wide to locate decent ones and then take care of them.
This is what I was referring to when I mentioned a cross cut axe. It’s lighter being there’s less metal but wasn’t sure of any other differences
www.tuatahiaxes.com
WORK AXE TESTIMONALS | tuatahi-axes
www.tuatahiaxes.com
Attachments
Mesquite
Treehouser
They’re a joy to use. I raced those and Keech in college. We used peg and raker cross cut saws made by a guy up in Canada, JP something(?). There are still some woodsmen comps in most states and you could justify one by thinking about going…
stikine
Treehouser
All axes are technically a crosscut tool designed to chop at a 45 degree angle. The design of the cheeks is specific to chopping efficacy for the task at hand. Competition chopping is way different than working chopping.This is what I was referring to when I mentioned a cross cut axe. It’s lighter being there’s less metal but wasn’t sure of any other differences
WORK AXE TESTIMONALS | tuatahi-axes
Similar threads
