R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #176
Double Ender
Double Ender Race
Double Ender Race
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #177
Makin More Chips
chipsoflyin
chipsoflyin
F
fishhuntcutwood
Guest
Now Rotax, you've told me before, but I forget (and I've had a few beer-o's tonight): That's a 066/088, right? Or is it 084/088? I seem to remember them being different saws. How do you match them? The 660's powerband resides at a differnt place (RPM) than the 880's.
I promise, I won't ask again....
I promise, I won't ask again....
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #179
These were 088 kd and a 046 kd I have ran 088/084 and 088/066 also. Never lost this race yet with any combination.
Rotax
Rotax
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #180
more chips
more chips
more chips
F
fishhuntcutwood
Guest
How do you match them? RPM's? Can you use 7 or 8 pin rims to help tune them?
I knew they were KD's. I got that part right!
I knew they were KD's. I got that part right!
F
fishhuntcutwood
Guest
These pics Rotax....I'm already pumped for Sequim next year!
squisher
THE CALM ONE!!!!
Heh that pic stolen from Rb, is there actually a guy in the back there taller than Gary?
N
newguy18
Guest
Heh that pic stolen from Rb, is there actually a guy in the back there taller than Gary?
Taller than Gary?oh shit could it be Frankenstein?
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #185
Heh that pic stolen from Rb, is there actually a guy in the back there taller than Gary?
Yup, that would be "Tractor Dave" my identical twin brother from another mother. He stands about 7' 1" or so. Hell of a lift partner. I just get tired of digging the postholes that he has to stand in when we cut. :roll:
Rotax
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #186
Tractor Dave
Hmmmm, can't find the right pic right now but here is one I posted a page or 2 ago. Behind the girl running the Harley saw facing you is Tractor Dave and on the right of the screen behind the Predator is one of my lift partners Kevin who is 6' 1". Yessireee, he is a BIG man.
Rotax Robert
Hmmmm, can't find the right pic right now but here is one I posted a page or 2 ago. Behind the girl running the Harley saw facing you is Tractor Dave and on the right of the screen behind the Predator is one of my lift partners Kevin who is 6' 1". Yessireee, he is a BIG man.
Rotax Robert
GASoline71
'cause chicks dig scars
I'm 6'5" and don't have to look up to talk to many men... But Tractor Dave is one of them. 
Gary
Gary
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #188
Fishhuntcutwood
Jeff, I have ran these double-enders for a while. 088/046 on above quote
I started with a 088 kd/ 084 rr (ken dunn) (rotax robert)
for the first few years.
The next couple years was a 088 kd/ 066rr "no pipe on 066".
Last year I ran a 088 kd/ 046 kd
None of the above saws match eachothers power band nor do they have too. I found that a dead match is actualy a hinderance, they need to compliment eachother. ie: A speed demon saw on pipe can be helped by a good muffler'd saw, as an example.
On my setups I am putting a saw with a boatload of hp with a saw that has a truckload of torque, and yes you can sprocket up or down to compliment what you are trying to achieve. I can't give all my secrets here as Gas71 will run and tell all the Buckley boys.
I will say though that when a 088/046 setup hands a pair of 090's thier A$$ something is going right. Wait till they see my 088kd/3120kd double-ender.
Rotax Robert
Jeff, I have ran these double-enders for a while. 088/046 on above quote
I started with a 088 kd/ 084 rr (ken dunn) (rotax robert)
for the first few years.
The next couple years was a 088 kd/ 066rr "no pipe on 066".
Last year I ran a 088 kd/ 046 kd
None of the above saws match eachothers power band nor do they have too. I found that a dead match is actualy a hinderance, they need to compliment eachother. ie: A speed demon saw on pipe can be helped by a good muffler'd saw, as an example.
On my setups I am putting a saw with a boatload of hp with a saw that has a truckload of torque, and yes you can sprocket up or down to compliment what you are trying to achieve. I can't give all my secrets here as Gas71 will run and tell all the Buckley boys.
I will say though that when a 088/046 setup hands a pair of 090's thier A$$ something is going right. Wait till they see my 088kd/3120kd double-ender.
Rotax Robert
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #189
I'm 6'5" and don't have to look up to talk to many men... But Tractor Dave is one of them.
Gary
6'5" / 5'6" whats the diff.
Big Friggin Deal, I am only 18 inches short of 7 feet
Rotax
squisher
THE CALM ONE!!!!
At some time or other in my life I'm gonna have to make it down to one of your guy's shows sounds like a blast!
Paul B
I dig hammocks.
Big Friggin Deal, I am only 18 inches short of 7 feet
Rotax
Thanks for the laugh Rotax!
GASoline71
'cause chicks dig scars
You're welcome around my campfire anytime Justin...
Gary
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #193
How to carry a chainsaw
This saves the old back.
http://www.youtube.com/watch?v=HE1YGr6ylbY
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/HE1YGr6ylbY"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/HE1YGr6ylbY" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>
This saves the old back.
http://www.youtube.com/watch?v=HE1YGr6ylbY
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/HE1YGr6ylbY"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/HE1YGr6ylbY" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>
N
newguy18
Guest
Robert how heavy is the predator?
R
Rotax Robert
Guest
- Thread Starter Thread Starter
- #195
A few more chip
Here's a few chips being made
Here's a few chips being made
F
fishhuntcutwood
Guest
Rotax, what are the odds of me running that saw at Sequim next May after the show?
Say "no" and it's cool. I totally, entirely understand a man's saw is a man's saw, but I figger'd I'd ask. I've never run a piped saw. I was going to run RB's piped 5100 last year, but never got around to it.
Say "no" and it's cool. I totally, entirely understand a man's saw is a man's saw, but I figger'd I'd ask. I've never run a piped saw. I was going to run RB's piped 5100 last year, but never got around to it.
GASoline71
'cause chicks dig scars
Hey Jeff you can run my saw anytime!
Oh wait... I doesn't have a pipe on it...
Gary
Oh wait... I doesn't have a pipe on it...
Gary
F
fishhuntcutwood
Guest
If you're gonna be at Sequim, I'm gonna hit you up for a run on the Termite...ya know, so I can objectively compare the two V8's. 
GASoline71
'cause chicks dig scars
If you're gonna be at Sequim, I'm gonna hit you up for a run on the Termite...ya know, so I can objectively compare the two V8's.
No sweat... Robert's will be faster. However... we are tryin' a few things that will hopefully put us a little faster next year.
I might even have a "stock" type hot saw to compete with next year too.
Gary
F
fishhuntcutwood
Guest
Next year will be my last year before I transfer, so I might just run for the helluvit.
