MasterBlaster
Administrator Emeritus
I want a couple!
More on dogs
- Thread starter Burnham
- Start date
- Replies 50
- Views 10K
littlenick
TreeHouser
those 200t dogs look nice!!
woodworkingboy
TreeHouser
Could be laser cut too?
sotc
Dormant hero!!
looks like plasma, stainless doesnt torch like mild steel. id be interested to know what they run sean. please pm me
B
Blinky
Guest
My guess is plasma too. I want one.
woodworkingboy
TreeHouser
I have a plasma cutter. Kicks ass on stainless, but anything too thick and the flame gets displaced and the cut comes out angled. For thin stuff it works great, like dawgs. I've used it to blow out a busted off bolt in a machine casing. The bolt took off like a rocket ship, and surprisingly, no damage to the threads in the casing :
darkstar
Rockclimber/ treeclimber
Thats one fine set O Dawgs
B
Bounce
Guest
To be honest, I don't know what he uses to cut the metal with, but he did tell me they are stainless. He said he is charging around $25 (Canadian dollars) plus shipping. I'm trying to bring them on here at Wesspur, but it might be a month or two before we have any.
Blinky - I couldn't reply to your PM because your acct is full. Delete some of those messages!
Blinky - I couldn't reply to your PM because your acct is full. Delete some of those messages!
B
Blinky
Guest
Sorry about that. I can wait a a couple months, let me know.
MasterBlaster
Administrator Emeritus
I could use them. I'm all the time cutting big stuff in the tree.
MasterBlaster
Administrator Emeritus
Also, I want them so guys will ask "WTH is that?"
MasterBlaster
Administrator Emeritus
Yea, 'lil bitty tiny ones. I want some Rambo Dawgs!
F
fishhuntcutwood
Guest
I could go for a set of those on mine. I make good 14" cuts with my 200T often enough so as to walk the saw around and not just slice through it.
Sean, let us know when they're on the shelf.
Sean, let us know when they're on the shelf.
MasterBlaster
Administrator Emeritus
I emailed the guy directly.
B
Blinky
Guest
Feckin' A!
Al Smith
Mac Daddy
Are there different sized dogs on a 200 ? Mine seems to be large enough for such a bitty little saw .
sotc
Dormant hero!!
mine dont seem big enough for anything but straight smooth wood
B
Blinky
Guest
I hardly ever dog my 200 in because they are so small.
When I think about it though, Rambo dogs might be problematic on tree that require a lot of movement around the canopy. I can imagine that thing dogging into my leg every once in a while.
Could also be a problem with sticking in the piece when the hinge snaps.
Still, I want one.
When I think about it though, Rambo dogs might be problematic on tree that require a lot of movement around the canopy. I can imagine that thing dogging into my leg every once in a while.
Could also be a problem with sticking in the piece when the hinge snaps.
Still, I want one.
MasterBlaster
Administrator Emeritus
Hell, I can always put the old ones back on.
sotc
Dormant hero!!
valid points on your dog issues
also rope could get hung up. i at least want to try it
also rope could get hung up. i at least want to try it
wiley_p
Climbing Up
I've often considered getting oversize dogs for my tophandle saws, except I remember all the times the dogs on my 70cc saws stab me in the leg, geeze the rope, etc. I'd be down if they were a bit bigger, but those ones look way big. I'll be looking forward to a report from you fellas.
