M
Mr. Sir
Guest
My bucket driver just hit a low limb and mangled the basket on my bucket truck. 
Any one know where I can get a new one quickly and cheaply? 
It's an Aerial Lift of CT, AL-60/50. Thanks. 
My bucket driver just hit a low limb and mangled the basket on my bucket truck. Any one know where I can get a new one quickly and cheaply? It's an Aerial Lift of CT, AL-60/50. Thanks.
J
Jonseredbred
Guest
SkwerI
Treehouser
Yes. Plastics Composite Company http://www.buckettruckparts.com/Contact_PCC.html is a good company to deal with. That's where I bought my replacement bucket. Talk to Warren and he'll hook you up.
You will need lots of measurements so you may want to call him while you are next to the bucket with a tape measure. They are in the Central time zone so you have time to call them before they close.
You will need lots of measurements so you may want to call him while you are next to the bucket with a tape measure. They are in the Central time zone so you have time to call them before they close.
SkwerI
Treehouser
Dang, I'm too slow. 
M
Mr. Sir
Guest
- Thread Starter Thread Starter
- #5
Thanks. I just left a message on Warren's voice mail.
M
Mr. Sir
Guest
- Thread Starter Thread Starter
- #6
Do you want 2 of them? I still have one from the last time this happened.
MasterBlaster
Administrator Emeritus
Crikey!
SkwerI
Treehouser
Brett, take one of them and find a fiberglass guy who can rebuild it. Then keep it as a spare.
Next time you're up this way I have a neighbor who is a fiberglass wizard and works for beer money since he's unemployed and his mom is rich.
Next time you're up this way I have a neighbor who is a fiberglass wizard and works for beer money since he's unemployed and his mom is rich.
J
Jonseredbred
Guest
If the clamp is still in them yes.
Heres is another I have bought from
http://www.alliance-equipment.com/
D
DTW902
Guest
Thats who I have used in the past. Had good luck and service, I don't remember the contact person I dealt with tho.
