cutting line neatly

[SoonerFan]

 

[bonner1040]

Hey Buddy!

That's the same thing I said!

Look even Butch is happy to read ya!

 

[Al Smith]

You can flame them if you do it right .

 

[NickfromWI]

Wrap tightly with masking tape, slice, then apply whipping.

 

[Marc-Antoine]

That's the same thing I said, only super glue works better than a flame.

But you can't flame it if there is super glue already on it. The result is a pita.

 

[MasterBlaster]

HuH?

 

[Tommy_B]

I use a ceramic knife and electrical tape

 

[Marc-Antoine]

But you can't flame it if there is super glue already on it. The result is a pita.

I tried once to splice an access rope. It has a less number of strands from the core (twisted parallel strands) than from the cover (braided). I wanted to glue together by pairs those in excess to match the other set. Bad idea. When I wanted to melt the tips to weld the strands from cover to the strands from core, all I got with the glued ones is burning and a very weak weld.

My explanation doesn't look very clear I fear.

 

[Tucker943]

Tape, cut, push against saw muffler. Done and back to work.

 

[MasterBlaster]

Don't use that Chinese tape use some good Scotch 33 plus .

I'm telling ya'll, Gorilla duct trumps everything. You gotta be strong just to pull it off the roll!!!