Any Rope Wrench or Hitch Hiker users here?
- Thread starter ClimbMIT
- Start date
- Replies 2K
- Views 232K
NHlocal
TreeHouser
I recently got that pulley too. Haven't had a chance to "put it to work" yet, .....but soon. 
ch74
TreeHouser
Climbmit. Is that the 10mm beeline ? I have blaze, and beeline works the best on it, but i guess its cause there both yale products if that makes any sense.
Raj
TreeHouser
Well, I think it's time for me to order a HH. Pruning a sugar maple today really made me think my Ddrt set up held me back..... Guess I'm off to Treestuff.com.... and to figure out what I want for an anchor.
sawman
TreeHouser
Oh thanks, let us know how it works out
sawman
TreeHouser
Go for it rajelectic,I love mine I'm prety new to climbing and the hh made things
Easy
You don't really need to send money on an anching system
Raj
TreeHouser
Naw, the money has been already spent, I have a few unused arborist rings, prussics with rings on them already and 60 some odd feet of 16 strand laying around, gonna splice something up some day soon.
rskybiz
TreeHouser
You will never regret the HH purchase. Enjoy when it comes!
sawman
TreeHouser
I wish I knew how to splice
Maybe this winter when things slow down
There's a thead here somewhere
Altissimus
TreeHouser
...Yep Joel said same thing to me !
Raj
TreeHouser
HH is ordered, I added a couple of DMM small rigging plates, I'm going to do some searching around to see what sort of basal anchor that would work for me. Looking back at the high angle work I've done I wish I knew about this site years ago, with all the details and advice..... you have no idea how many times I've lowered and raised a 10 or 15 hp electric motor out of a silo or elevator, well, very unsafely and without very much control....but anyway, on to the future!
Altissimus
TreeHouser
... Using HH though I still feel like a rook and not dialed. Need more friction will add another wrap tomorrow.... Wondering if Bee line has a break in period (like all ropes)...mebee some more climb time on it ...???....
Can't stress enough to get your friction hitch tied tightly from the get go.
Really, yuk your climb line up tight, tie the VT till it almost makes a bend in the climb line, (pull as much as possible through the dog bone before you tie the final fishermans) you'll be surprised how much it slackens once you sit in it and start climbing.
Every time I feel I'm losing friction it's because the hitch needs tightening, not an extra wrap.
I climbed all summer on Tachyon 11.7, I wasn't sure it would feel as secure as my 12mm XTC, but it was just fine, didn't flatten as much, was fine to grip, and was easier to one hand than XTC (never needed my bent gate biner trick I need for the XTC to make a better bend radius for one handing)
Going to buy a new Tachyon rope for the southern hemisphere, going back to XTC will feel like a regressive step!
Really, yuk your climb line up tight, tie the VT till it almost makes a bend in the climb line, (pull as much as possible through the dog bone before you tie the final fishermans) you'll be surprised how much it slackens once you sit in it and start climbing.
Every time I feel I'm losing friction it's because the hitch needs tightening, not an extra wrap.
I climbed all summer on Tachyon 11.7, I wasn't sure it would feel as secure as my 12mm XTC, but it was just fine, didn't flatten as much, was fine to grip, and was easier to one hand than XTC (never needed my bent gate biner trick I need for the XTC to make a better bend radius for one handing)
Going to buy a new Tachyon rope for the southern hemisphere, going back to XTC will feel like a regressive step!
SouthSoundTree
Treehouser
I bend my climb line into a "U", full 180.
ch74
TreeHouser
Nhlocal, When u going to do some more vid's on u climbing with the RW. Do u like the Rw/Rw better then the , HH/rw?
sawman
TreeHouser
I tie my hitch, put all my weight on it and retie to get all the slack out
At base of tree I find if I don't my hitch gets lose when I'm hi in the tree
For me its safer to tie it twice at base,saves me in the long haul.
Hope this helps someone and makes sence
At base of tree I find if I don't my hitch gets lose when I'm hi in the tree
For me its safer to tie it twice at base,saves me in the long haul.
Hope this helps someone and makes sence
rskybiz
TreeHouser
Works well for me also as tight as I can. The dog bone pushed up, then tight turns hold hitch and bone feed the tail and pull as tight as possible double fishermans and finished.
Dave, I did find the beeline far better after a few climbs! Glad you got one and hope your enjoying it
Dave, I did find the beeline far better after a few climbs! Glad you got one and hope your enjoying it
ClimbMIT
TreeHouser
- Thread Starter Thread Starter
- #1,068
Well got my first climb on the ISC RW. I am climbing on Vortex 12.7mm with 10mm bee line, ABR stiff tether, and Ct fixed pulley. First climb tended like a dream of course! Only once I had to manually reset the Wrench when had my basal anchor untied and girth hitched the spar. Also loved how predictable and easy it was to control the friction when descending. I ran into one issue however, the pulley on the RW I noticed was quite sharp and sticks out maybe a 16th of an inch from the side plates. I went up and down the tree 3 times and noticed the pulley had shaved my climbing line. It is a line I that is well used. When I was on the ground I noticed on the slic pin there was tiny shavings on my climb line. I tried to take a pic but it was quite windy yesterday and blew out of my hand. I contacted Luke at Treestuff and sent him pics of the pulley on the RW. He e-mailed the message and pics to ISC. Anybody else run into this?
SouthSoundTree
Treehouser
That WR is slick looking. I imagine that one performs differently than the zk1.
ClimbMIT
TreeHouser
- Thread Starter Thread Starter
- #1,073
I like it much better than the Zk-1. I just hope I can figure out if its the pulley that's a little sharp or what it is! I really want to use it. I was about to put it on brand new 150' Vortex but already had an older 120' section in the tree so I used it. I am wondering if the rope is flatened out some as well causing it to ride along those edges.
Joezilla11
TreeHouser
Are u sure it's the edges of the pulley and not just wear from the friction. I read of guys having a similar issue with the zigzag
Similar threads
