Search results for query: *

We took the ferry across Mobile Bay from Dauphin Island to Ft. Morgan. While in route, our youngest daughter texted me that she was out on the bay as well on the Sea Lab boat. They were catching and tagging sharks. Our courses passed close enough that we could see her waving at us from her boat.

Oooo I hate mouse damage. I kept some traps set full time on equipment (stumpers) that didn't move daily. One morning as our convoy was pulling out in the morning, my guy radioed me that some mice were running around on the rear counterweight of the Kubota loader :\: :/:

I have been using a jump cut of sorts. Single kerf undercut about a third deep, single kerf cut on the far side but keeping that cut vertical in relation to the undercut about a third deep, single kerf cut on the near side severing the corner, and sweeping down for the release. They pop off nice...

Nostalgia isnt what it used to be

I scaffold knot into a biner with keyhole gate, not ledge gate. Fusion D steel. wesspur Half hitches ( or marls on brittle pieces) take the strain of the biner. If a piece breaks apart, marls cinch onto the wood. If the marl breaks the piece, you can get a knot.

Yay tires!! Boooooo rats!! Peppermint and dryer sheets are supposed to repel rodents. I've been dealing with rodents a little bit over the last decade. In a couple of days, there was rodent food waste (bird seed shells, but no germinated birds!) inside the engine compartment.

Hip stretching and anti-inflammatory. Dr google. I stand in my right leg more than my left. Tree work is asymmetrical.

So you're going up on the left or right side of the rope there? Do you scope it with binocs when it's that high up?

I dig it, great line of thought imo. As a 90's kid I am often nostalgic for those times. I've long been interested in the romanticizing of the past. Done it myself plenty, from my own life and from times I'd never experienced. In the end I decided now was by far the best time for me to be...

My IT band is beat up and f'g wit my hip. How'd yours get beat up and got any plan to whup it?

Tear-limiting undercut near the collar near the base first in case of premature limb failure. The offset is large enough to prevent interfering with the release cut, I think. Good cut. Coos Bay may be less risk of a bound saw compared to boring.

@levi r Well, in the 70s there was this kind of re-imagining of the 50s as some kind of golden era, Happy Days was symptomatic of that, in the UK we had pop bands dressed up and singing in 50 styles clothing. It drifted into the eighties but then died out. There is a strong nostalgia these days...

Especially with sore knee from a tight IT band, I liked having a TIP 15'different from the topping point. Lots of sitting in my saddle during and between cuts with an easy to swing around to get good positioning. PSP/ redirection point for the base-tie at 80% height. Had to join ropes as the...

Whyz it gotta be phony, Mick?

Ok I have a point, what links Me/Weezer/Happy Days is phony nostalgia.

I had a thought today about that video from Weezer. Here we are in the mid 2020s posting a video from 30 years ago (1994) In the video you see Happy Days which aired 20 years (1974 approx) before the Weezer video. Happy Days is set in the mid 50s, 20 years before the release of Happy Days. So...

5/8" is fairly beefy imo. For limbs and for trunk sections up to say 300lbs, I'd use 1/2" with a rope snap on end for super fast, easy hook ups and unhooking. For heavier pieces, I'd go with the 5/8 and a bowline.

Kinda depends on what you want to do and see. The bear stuff at Anan starts around the 4th of July and peaks in August. Other things like whale watching, Stikine River, LeConte glacier are more flexible.

I’ve never missed a shot. 😁 Actually, seriously, not by a significant or damaging amount. Limbs on the other hand…

Ok guys. Knotknewb 5/8” arborplex for rigging I think I want to just use biners and choker straps on the ends, or at least one. What terminations do you like?