Which big bar, and from where, please.

[Cut4fun]

Thanks.

My friend is going to buy a big bar for chainsaw milling stuff down to bandsaw mill capacity with an MS 056, or I've suggested to him, a double-ended bar with two powerheads. His brother is the retired logger, so between them, I think that they have powerheads, might be 2 056s.



https://leftcoastsupplies.com/product/48-gb-narrow-kerf-lo-pro-bar-gblp-hshl48-50wr/ https://leftcoastsupplies.com/product/63pmx-lo-pro-ripping-chain-dl-375-x-050/

Wondered about narrow kerf for milling.

This price can't be right, though.

Thats per drive link. .25 a DL times how many you want to put a loop together. They have 6K+ on hand.

 

[SeanKroll]

The bars are listed cheap

48" low profile GB for $66. Out of stock.

 

[rbtree]

Dirt cheap for those bars.. and .25 per dl is also cheap, as, these days, 100' of chain is up about 50% from its $200-225 per roll days of old.

I have little experience with GB bars, but don't recall the orange painted one I had, 36" .050 for an older 660, being anything all that exceptional... soft even?

 

[rbtree]

Maybe I need a 3120, since I'm rolling in all this dough, moving and not working, and down payment, and moving costs, and...

Better'n rollin' in poison oak, rich boy!! But you're rich in spirit.....!!


I've run 42" on a dual port muffler 660.....

 

[SeanKroll]

Thanks, my 660 is dual port, and going to be 'built' when I get it fixed, scored piston, supposedly from the seemingly crisply functioning decomp valve, per the mechanic as the dealer.

 

[Raj]

Naw. I think you should just send that junk to me.

 

[sotc]

I have a 460 and a 660 with 42" on them right now, no problem. .063 on everything bigger than a 200. Then .404 on the old saws. That way I just buy rolls of .063 and loops of the others. Oregon bars are fine. This is the hopped 460 https://www.instagram.com/p/BjG49zYheF9/?taken-by=treewillie

 

[Merle Nelson]

Willie!!!!! Willies in da House!

 

[squisher]

Been awhile man. Hope all's well.

 

[sotc]

It's going.

 

[stig]

Hi Willie.
Good to have you back.

 

[SeanKroll]

yep