bonner1040
Nick from Ohio
So I did it yesterday, jury is still out... I need to do some fiddling with the setup... Has anyone else done it? I would be interested to know if you set up the rigging plates as seen in the videos or differently.
It turned the plates around when my weight was on it. I expected this and it wasnt 'uncomfortable' but It made the stopper knots go to the inside, they didnt press on me because of the separation caused by the rope pulling my bridge upwards and away. I didnt like it because I couldnt see the stopper knots... It was just a rec climb with a friend but as I got higher not being able to see the knots freaked me out.
Also It seemed to make my leg straps higher and tighter to my body, I will likely have to lengthen the bridge adjuster to longer than I previously had it set.
I will get some pictures of my rig on me how I settle on keeping it configured.
For now here is the video I used as instructions and links to the materials.
http://www.youtube.com/watch?v=tiim7GHbHr0
https://www.treestuff.com/store/catalog.asp?item=1761
https://www.treestuff.com/store/catalog.asp?item=1139
I know that some of this is rehashed info from some of my previous posts and threads, but now that I went through with it I wanted to have a thread for people to post their experiences with the mod. Plus if someone is searching for info on the Liger mod it will be easier for them to find more knowledge in one place. It would be nice if this could be separate from the debates on Weaver and Dyneema and such.
It turned the plates around when my weight was on it. I expected this and it wasnt 'uncomfortable' but It made the stopper knots go to the inside, they didnt press on me because of the separation caused by the rope pulling my bridge upwards and away. I didnt like it because I couldnt see the stopper knots... It was just a rec climb with a friend but as I got higher not being able to see the knots freaked me out.
Also It seemed to make my leg straps higher and tighter to my body, I will likely have to lengthen the bridge adjuster to longer than I previously had it set.
I will get some pictures of my rig on me how I settle on keeping it configured.
For now here is the video I used as instructions and links to the materials.
http://www.youtube.com/watch?v=tiim7GHbHr0
https://www.treestuff.com/store/catalog.asp?item=1761
https://www.treestuff.com/store/catalog.asp?item=1139
I know that some of this is rehashed info from some of my previous posts and threads, but now that I went through with it I wanted to have a thread for people to post their experiences with the mod. Plus if someone is searching for info on the Liger mod it will be easier for them to find more knowledge in one place. It would be nice if this could be separate from the debates on Weaver and Dyneema and such.