250XP autofeed

WoodCutr

Treehouser
Joined
Aug 12, 2021
Messages
1,514
Location
Tennessee
anyone ever deal with updating autofeed on a older (2002) bandit? the 2 wires from the tach to the solenoids on the back are bad, im debating on going OEM route and buying all new wiring/tach, or autofeed plus
any input would be great, ive heard autofeed plus is fantastic but kurt can be quite the character if you will, and not the best for customer service sometimes

I should mention, till I replace those 2 wires going to the back, I have no way of testing the tach to see if it works
 
You’ll have to fix the wires before doing anything, right?

I added auto feed to a chipper years back with Kurt’s product. I didn’t bother making it reversing auto feed.
 
  • Thread Starter Thread Starter
  • #3
You’ll have to fix the wires before doing anything, right?

I added auto feed to a chipper years back with Kurt’s product. I didn’t bother making it reversing auto feed.
Yes, the wires are trash and cannot connect the tach to the hydraulic system
Tach has damage and I'm going to just replace it anyways for peace of mind

Mine had autofeed plus from the factory, then a bandit system, going back to autofeed plus, my machine has reversing autofeed
 
Back
Top