Search results for query: *

Hi All, Sorry if this is a repeat, i didn't have much luck with the search engine. For various reasons my saws have been in storage for about two years. Prior to storing them i ran them dry and opened the fuel lid for 24 hours to let the remainder evaporate. About a week ago i fueled up my 346...

Just wondering if these saws are known for flooding? We have one of these in my local RFS. The saw doesn't leak fuel at all but when it's choked we pull until it fires then push the choke in and pull until it starts. Commonly what's happening is the saw will not start but fuel drips out if the...

Wondering if anyone has any ideas or pics on how to improve the air filter setup on 660s? I have the standard Australian setup with dual port and a pre filter which is keeping the carb clean but the filter is always heavily covered in chip. It seems that once the saw sucks in the chip to the air...

Has anyone heard of this? I was told stihl have released an upgrade kit. the kit consists of a bigger carbie, flywheel, and coil at a reduced price

Hey all, As above im wondering what the general thoughts are on this saw? Im not interested in comparisons to bigger or littler I'm more interested in what you guys think of the build quality, reliability etc I have a second hander fixeruperer which I'm considering buying but i cant find much...

Hey all, I have a 026 fixeruperer which i have been tinkering with giving me some strange problems. Ive not come across this problem before. When its cold it starts as no worries, when its hot it starts no worries, but when its hot if you do a long cut at full rpm it then the revs start to...

I have a couple of old 338s and a 026?which i thought i might have a tinker with. Im going to cut up the muffler a little and wondering if i can braze it back together. I dont have anything to measure how hot a muffler gets. The brazing rods i have a 450 deg c melting point. Anyone got a guess...

Hey all, Im looking for some new bars, initially for a 660 but ill also be replacing the bars on the 575 and 3120 within the next six months. I want to get all bars in 3/8 . 058. Im mainly using the saws for ripping or felling so weight isn't a real concern. If im blocking down its generally...

Hi all, I mainly run huskies and am trying to get down to two types of chain. These would be .325 058 and 3/8 058. I also have a 660 with about four bars ranging from 24 inch to 36 inch which are all .063. If i put a .058 chain on these bars i can see a little extra slop in the bar but im...

Hey all, ive been playing with my 346 with both a 7 pin sprocket and an 8 pin sprocket and im not really noticing much difference in torque during the cut. Does the affect become more noticeable on bigger saws? From the speed increase im seeing on the 346 im thinking of going bigger sprockets on...

Hi all, i have had a read through some of the old posts but im still unsure how to identify if i have rev limited coils. All my saws were sourced in oz except for the 3120 which came from British Columbia. In particular im interested in how to identify them in the saws i have. They are...