Husky 395 and 576's. And 201's for sale

[cory]

What's a solid price for a Husky 395 in very good condition (always ran sharp/one owner). With a couple of 28" bars and a 32" and 42" bar, with new spare chains.

And 576's with 24" bars and chains. Good condition like the 395 above but with more hours on them.

And 201's with 16"b+c.

I only buy stuff new so aren't sure what used stuff is worth and I suspect some of you folks have a good idea re prices.

 

[flushcut]

$600-700 is usually what I see. But %50 of new I would be happy with if it were me considering all the dough the saws helped make. Or use them a bonus for buying a stumper and bucket truck. Buy one get one free sort of thing lol.

 

[Dave Shepard]

What does the 42" fit, are all big Husky saws the same? I think so. I think Stihl 084 and up are different than the "small" big saws.

 

[flushcut]

Yes, Husqy has a large mount and a small mount for their bars. Their 50 cc saws and under are small mount but can be ordered with a large mount on some models, and 60 cc saws and up are large mount.

 

[BIGTWIG]

@cory

Used saw prices are very soft right now. Honestly I would just hang onto them if you think you’d ever need them again. Or list them mid summer IMO. Check opeforum for saw prices, it’s a good resource.

Tom

 

[BIGTWIG]

What does the 42" fit, are all big Husky saws the same? I think so. I think Stihl 084 and up are different than the "small" big saws.

Stihl 084 and 088/880/881 are S2 mount.
All other Stihl pro saws aside from top handles and small saws are S1 mount. At least that’s how c
Cannon designates their Stihl mounts.

 

[cory]

@cory

Used saw prices are very soft right now. Honestly I would just hang onto them if you think you’d ever need them again. Or list them mid summer IMO. Check opeforum for saw prices, it’s a good resource.

Tom

Thanks for the info and suggestion. Just curious, any reason you can put your finger on re why soft prices?

One bit of a curve ball presented itself over the weekend- I used a 201 for a couple hours of bucket work.The weather was warm and the last time I'd used it was in cold December weather and it ran perfectly. So it did the thing all my saws do on the first day of warm spring weather, it ran a little funky intermittently and when I removed the gas cap to check fuel level, sure enough it was pressurized and bubbly, as in vapor lock. I made a thread about this pita phenomenon saws with mind of their own - https://www.masterblasterhome.com/threads/saws-with-mind-of-their-own.27587/


So therefore it would seem I have about 5 gallons of winter grade saw gas and spring/summer is here now, not sure what to do with the product

 

[stikine]

Put a bit of it in your rig occasionally to use it up... not all at once though.

 

[BIGTWIG]

Thanks for the info and suggestion. Just curious, any reason you can put your finger on re why soft prices?

I think it’s because money is/has been tight for a few years and things are more evidence is showing.

One bit of a curve ball presented itself over the weekend- I used a 201 for a couple hours of bucket work.The weather was warm and the last time I'd used it was in cold December weather and it ran perfectly. So it did the thing all my saws do on the first day of warm spring weather, it ran a little funky intermittently and when I removed the gas cap to check fuel level, sure enough it was pressurized and bubbly, as in vapor lock. I made a thread about this pita phenomenon saws with mind of their own - https://www.masterblasterhome.com/threads/saws-with-mind-of-their-own.27587/

At least you didn’t check with your mouth open. That’s a lesson that only needs to be learned once.

So therefore it would seem I have about 5 gallons of winter grade saw gas and spring/summer is here now, not sure what to do with the product

Got burn piles?

 

[Burnham]

I'm with @stikine...run it through your vehicle. But I'm not quite as cautious...start with a full tank and soon as there's 5 gallons of room in the vehicle tank, I'd pour the lot in and never worry. Just don't put it all in an almost empty tank.

 

[davidwyby]

375s are a little sought after. @huskihl makes 'em run real good. I have a couple red ones I like.

 

[BIGTWIG]

375s are a little sought after. @huskihl makes 'em run real good. I have a couple red ones I like.

@cory
Instead of selling it for a low dollar, send that bad boy to Kevin 😂

 

[SkwerI]

I have owned a half dozen 372's, never heard of a 375. I did have a saw from Bailey's once that was a Husqvarna 372 but with a slightly larger bore and it didn't say 'Husqvarna'. I think it was 75cc instead of 71. It was privately labeled from some company as a firefighter's saw. Was my favorite stock 372 ever!

 

[cory]

, never heard of a 375.

Doh!!!

Should be '395'.

Thanks. Edits made.

 

[Dave Shepard]

Now I'm drooling!

 

[Nutball]

I was wondering why you had a 42" for a 75cc.

 

[davidwyby]

I was wondering why you had a 42" for a 75cc.

Me too

That being said

I ran 36” once with skip just for kicks on a ported 2175

 

[Nutball]

I once ran a 42" full skip on a ported 590. I knew someone who would talk about how much money he makes, then instead of buying a big saw, he just bought a 36" semi skip for his ms290.