Search results for query: *

By the sound of things that 056 needs one too . Those people must have been nuts to build 100 cc saws with no decomp ,good heavens .

Well regarding that 2100 I'll either get that bullheaded SOB to fire on command or I'll turn it into a cylinder block for a Toyota .:what: Psst , I sometimes loose my patience with these things .:roll:

I've been told the 056 Mag and the 2100 Husqvarna use the same solid state ignition system IE: internal coil .I'll say this ,my 2100 is the hardest starting SOB I have ever had the displeasure of dealing with .Runs fine if you can get it started .

According to the manual the points air gap is 13-16 thou . Advance is 26.2-27.5 .This corresponds to 98-116 thou before piston top dead center as measured by way of a dial indicator through the plug hole . If I read it correctly the air gap is 7-11 thou on the coil . If the points are not...

If I'm not mistaken the 056 is that tricky son of a gun you have to use a timing light on . 150 pounds on a gauge is not the hard part .Pulling over 93 cc is . Is the bushing ok in the starter housing ?