Had a good size piece of Sugar Maple top break out over customers shed ... same approach just not as complex. Branch tips lodged in a Hemlock on other side of the shed , 20" at the butt of the break which was almost but not finished breaking ... same approach but didn't need the GRCS. After climbing and setting a couple of lower lines slings and blocks and two port o wraps w slings , plus two pull / control lines and a small hand winch and another
sling ... thought to myself , glad I have all this gear ! ... Got it set with entire mess secured first session and started cutting out broken Hemlock limbs until I ran out of light , overnight the Maple break finished peeling off the little holding wood remaining , walked in next day to see just about the whole thing had dropped into the rigging , harmlessly swinging in the breeze safely suspended over the shed ...