Yoooo. Question here. Now that I'm retreaded, I'm burning a lot of wood everyday. And I'm happy to report btw that my wood supply is working out quite well I think bc I made sure to cut all pieces reasonably short to help with the 100% hand splitting and I split all pieces a lot as in no big chunks. Those 2 factors I believe facilitated faster drying in my large stacked pile covered only on top with one sheet of clear plastic.
The problem I'm having is with coals. When I load up the empty firebox in the morning I get great heat out of the resulting roaring fire. Eventually of course, the logs burn down and the heat output lowers some and I then add more logs and the output rises again. Rinse and repeat. But after about 5 hours of this, eventually the level of red hot coals builds up quite high in the fire box thus physically limiting the amount of room available to add in more logs so therefore I get a reduction in heat output despite the box containing a large amount of coals.
No doubt you wood stove savants have some answers...