I leave a bit of wood on three buttress roots on big stumps, then cut through those roots vertically, finishing by flushing off the unloaded roots. Wedge free, no settling.
IF you're cutting straight, and start out level, its easy enough. If you have any overlap, a couple bangs on a wedge frees it up. If you're going to have to move the stump-cut by hand, wedges give the slippery surface that makes it easier.
If you cut well through a stump, with a long bar, it will want to start to settle, if you put two wedges on opposite sides, 60% of the way through, you can cut out the other side, and the stump-cut drops to the starting side, your bar is not weighed down.
I buy and use all the wedges available at one point or another ... have my opinions about them all. My take on the hard heads is they certainly drive better but the harder plastic tends to spit more.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.