bonner1040
Nick from Ohio
A while back Dave McNeil (Username: dMC) loaned me some items for me to experiment with. When I was done with them Dave's intentions were for me to auction them off with all proceeds going to support the TreeHouse.
The items are:
Rock Exotica Unicender
-It is heavily worn and in need of a rebuild sooner than later. A rebuild costs $130 through Rock Exotica. This unit has one of Daves modified shoulder bolts installed that definitely makes tending slack more intuitive and easier.
MSRP: $299
https://www.treestuff.com/store/catalog.asp?item=1624
Petzl Ascension
-This is a modified right handed ascender with moderate wear. There is a nice layer of black tape increasing the palm swell of the grip. It also has cmi pulley installed in one of the lower holes. This is PERFECT for a rads setup and has been featured in tons of Daves posts.
MSRP: $75
https://www.treestuff.com/store/catalog.asp?item=1207
ART Lock Jack Sport
-This is a used item with moderate normal wear. It comes with an additional, brand new, cam. It is the original model and is non-anodized. It is not a swivel model.
MSRP: $342 + $33 for the cam
https://www.treestuff.com/store/catalog.asp?item=3492
RopeWrench ZK2
-This is basically a brand new ZK2. It has no noticibale wear to speak of. I will include a crude whipple-like tether I made. Its not a great tether but it will do for someone with nothing.
MSRP: $125 + $1,000,000 for the tether, which really is priceless because I made it and its one of a kind.
https://www.treestuff.com/store/catalog.asp?item=2030
US Rigging Supply 18' WireCore Flipline
(Donated by MerleNelson!)
This is a like new standard WireCore flipline. US Rigging Supply probly makes 80-90% of the wire core fliplines out there. It is the all orange one you are familiar with.
******************************
All shipping within the lower 48 states will be covered by me. All payments will be made to the TreeHouse Donation Link through PayPal. Winning bidders will communicate shipping info to MB with payment and he will communicate it to me.
Bidding will be done through the following link:
https://docs.google.com/forms/d/1xoury6UhnEyFc309C-ckQDI7B6PrZHwVLROfUguyHWs/viewform
NO BIDS WILL BE ACCEPTED THROUGH ANY CHANNEL OTHER THAN THE FORM LINKED ABOVE.
NO INCOMPLETE FORM SUBMISSIONS WILL BE ACCEPTED
Bidding will continue from today until 12AM August 15. No bids will be accepted after the deadline. Thats the night of the 14th and the morning of the 15th.
All bidding is open and transparent. All bids can be seen @ this link:
https://docs.google.com/spreadsheet/pub?key=0AgdhDSgJVv4KdEJIY2NJaVZBaHdaZExyUHBYVUcwS2c&output=html
Thanks to Dave and please remember that 100% of the proceeds benefit The TreeHouse.
Feel free to post bids in the forum but realize that only bids submitted on the form will be considered.
The items are:
Rock Exotica Unicender
-It is heavily worn and in need of a rebuild sooner than later. A rebuild costs $130 through Rock Exotica. This unit has one of Daves modified shoulder bolts installed that definitely makes tending slack more intuitive and easier.
MSRP: $299
https://www.treestuff.com/store/catalog.asp?item=1624
Petzl Ascension
-This is a modified right handed ascender with moderate wear. There is a nice layer of black tape increasing the palm swell of the grip. It also has cmi pulley installed in one of the lower holes. This is PERFECT for a rads setup and has been featured in tons of Daves posts.
MSRP: $75
https://www.treestuff.com/store/catalog.asp?item=1207
ART Lock Jack Sport
-This is a used item with moderate normal wear. It comes with an additional, brand new, cam. It is the original model and is non-anodized. It is not a swivel model.
MSRP: $342 + $33 for the cam
https://www.treestuff.com/store/catalog.asp?item=3492
RopeWrench ZK2
-This is basically a brand new ZK2. It has no noticibale wear to speak of. I will include a crude whipple-like tether I made. Its not a great tether but it will do for someone with nothing.
MSRP: $125 + $1,000,000 for the tether, which really is priceless because I made it and its one of a kind.
https://www.treestuff.com/store/catalog.asp?item=2030
US Rigging Supply 18' WireCore Flipline
(Donated by MerleNelson!)
This is a like new standard WireCore flipline. US Rigging Supply probly makes 80-90% of the wire core fliplines out there. It is the all orange one you are familiar with.
******************************
All shipping within the lower 48 states will be covered by me. All payments will be made to the TreeHouse Donation Link through PayPal. Winning bidders will communicate shipping info to MB with payment and he will communicate it to me.
Bidding will be done through the following link:
https://docs.google.com/forms/d/1xoury6UhnEyFc309C-ckQDI7B6PrZHwVLROfUguyHWs/viewform
NO BIDS WILL BE ACCEPTED THROUGH ANY CHANNEL OTHER THAN THE FORM LINKED ABOVE.
NO INCOMPLETE FORM SUBMISSIONS WILL BE ACCEPTED
Bidding will continue from today until 12AM August 15. No bids will be accepted after the deadline. Thats the night of the 14th and the morning of the 15th.
All bidding is open and transparent. All bids can be seen @ this link:
https://docs.google.com/spreadsheet/pub?key=0AgdhDSgJVv4KdEJIY2NJaVZBaHdaZExyUHBYVUcwS2c&output=html
Thanks to Dave and please remember that 100% of the proceeds benefit The TreeHouse.
Feel free to post bids in the forum but realize that only bids submitted on the form will be considered.