Stihl 066 Woods Ported

Cut4fun

Redneck Chainsaw Repair
Joined
Nov 27, 2007
Messages
2,635
I have been selling my big saws off. The call for big wood quartering isnt there like it was early on for me. So I sold all my stock and woods ported 084, stock 3120, woods ported 166 off.
Somehow I ended up with 2 more 92cc saws a woods ported 066 and stock MS660 to go with my BC Brent Combs woods ported 066. Already sold the other woods port.

I am selling my Brent Combs woods ported 066 with updated poly flywheel crankcase, but with square back red light covers and NO de-comp cylinder. Has new clutch cover, New oem DP cover or can put a homemade DP cover with little tube in front cover pointing out and angled left a hair. Your choice. This is a true bad azz work saw that other known builder has gotten the numbers from for some of his 066 660 builds.

I'm thinking $600 for woods ported 066 I use for my personal use since 07 (NOT Commercial use, just once in a while big log duties for a homeowner), PHO or can work out deal with a used 25" ES bar and stihl RSC chain or 32" Carlton like ne w with chain.

I have 3 different dawg types to choose from, small stihl inner dawg only, big stihl dawgs set and baileys big dawgs.

066 poly flywheel crankcase with redlight covers and topend woods ported and HD filter. NO de-comp, hence 460 rescue handle installed. Redlight stuff has been removed and saw is NOT rev limited.

This was testing my 5 ci race chain on the 066 for fun set at only 14K

<iframe width="480" height="390" src="http://www.youtube.com/embed/mUTMEcvTLr0" frameborder="0" allowfullscreen></iframe>


23" fresh spruce testing chains one day.

square chisel skip

<iframe width="480" height="390" src="http://www.youtube.com/embed/21GX7mLg_gA" frameborder="0" allowfullscreen></iframe>



semi chisel chain


<iframe width="480" height="390" src="http://www.youtube.com/embed/urZCndDIIdo" frameborder="0" allowfullscreen></iframe>



066MS660006.jpg

066MS660007.jpg

066MS660008.jpg

066MS660009.jpg

066MS660010.jpg
 
  • Thread Starter Thread Starter
  • #5
Top right motor mount is brand new oem. New HD filter, new oregon drum, new 8T rim, new clutch bearing. ;) They didnt need to be replaced, I kept old ones for back ups. I pretty much try and stay on top of mechanical stuff.

:big-tongue3:

thattreeguy your PM box is full, have a pm for you :D.
 
  • Thread Starter Thread Starter
  • #7
SOLD woods ported 066 and the stock MS660
 
Back
Top